|
Oak Rolling Ladders
Call 800-225-2510 for models and ordering info
This rolling ladder is made of best-grade red oak,
which is filled and varnished. Steps are screwed
to rails, not nailed, and rods are placed under
each step for greater strength.The top slide feature is available in either
roll type or hook slide. The roll type top
fixture is for a ladder permanently attached
to the track. The hook slide top fixture is
used when a ladder needs to be
removed from one section of track to another. The ladder rolls easily on bottom fixtures.
Also available is an old style malleable bottom
fixture for a more antique look.
Measurements of the Rolling Ladder are as follows:
•Height: as required (7” clearance above the track is required)
•Steps: 4¼” deep
•Outside width: 16”
All measurements can be altered.
All track includes end and center brackets designed to mount on
3-foot upright centers. HOW TO ORDER –
PLEASE INDICATE THE FOLLOWING:
1) Height of track: measure from floor vertically
to center of track. You need 7” clearance above track.
2) Specify length of track desired.
3) If you want rubber treads.
4) If you want wheel brakes.
If the shelving layout is unusual, please provide us with a rough sketch. Call 800-225-2510 for models and ordering info.
|
